(incl. 1st year monitoring)
Billing starts after 1st year - averages to $0.49 / Day
This Sent.io™ is configured with two (2) 4-20mA analog inputs for use with any sensor with a 4-20mA output. Sensor power is provided by the Sent.io™, so there is no need for an external power supply. Sensor power is switched on prior to sampling to save battery life - the sampling dwell time is configurable to allow attached sensors to settle prior to sampling.
Samples are taken from both inputs every 5 minutes and reported to the cloud every 8 hours or when user defined alert thresholds are met.
Easy to install - just peel the adhesive backing and press onto a flat, horizontal surface. Once installed, wake it up with a magnet and verify the 3 LEDs are on.
| Specification | Minimum | Typical | Maximum | Units |
| Analog Input Range | 4 | -- | 20 | mA |
| Analog Inputs | 1 | 2 | -- | |
| Battery Life | 2 | 7 | 10 | Years |
| Sample Rate | 5 | 30 | 60 | Minutes |
| Report Rate | -- | 4 | -- | Hours |
| Connectivity | -- | 4G Cat M1 | -- | -- |
| Sensor Power Supply | -- | 12 | -- | Volts |
| Sensor Power Current | -- | -- | 40 | mA (both channels) |
| Operating Tempeature Range | -40 | -- | +80 | Degrees C |
| Internal Temperature Sensor Accuracy | -- | +/- 1.5 | -- | Degrees C |
| Enclosure Rating | -- | IP67 | -- | -- |
